Headpin Tutorial

So, I finally finished the tutorial for making headpins.  It's in .pdf format and hosted on Google Documents, so you can read it directly from the net or download it to read it later. 

Making Headpins

If you'd like to see a finished piece where I used this technique, see this ring.

How to Balance Art and Life

If you're an artist, struggling to make a living off of your art, it can be really, really hard to dedicate enough time to your art while not neglecting the other facets of your life.  I suppose that can happen with any field of interest that takes time, but I'm going to concentrate on art, because that's what I love.

For Karla and I, it has gotten really tough to dedicate the necessary time to promoting the site, creating new pieces, keeping a regular posting schedule on the blog and store... ugh!  It is a nightmare of a balancing act.  Between the little boy, my day job, cleaning, cooking, going out... we've only got a few hours each night to work on this stuff.  But you know what: we work on it!  That's the only way to get it balanced.  Do everything you need to do to make life livable and confortable.  Then, take your spare time and go at it!  If art is what you love, do it, practice it. 

I, personally, think it's better to branch out, as well.  Let's say you don't want to do any jewelry tonight.  Pick up a sketch pad and draw out your next cool design.  Grab some polymer clay and work with that for an evening, instead of crystals and wire.  It helps clear the mind and, a lot of times, provides inspiration that you wouldn't have gotten otherwise. 

Another source for inspiration, at least for me, is always being observant during my day job.  It's always funny the ideas that come to me as I watch someone walk down the sidewalk, or push a cart in the supermarket or whatever! 

I think that art should permeate life.  Art is inspired by life and it imitates life.  Embrace it, think about it and you may be surprised what you come up with.

Polyclay Cuff Bracelets

So, I've worn the cuff off and on over the past couple weeks.  I've got to say, it turned out better than I expected.  That being said, I say there's room for improvement!  Polymer clay is a very versatile, and that's one of the reasons I love it.  But... it's not very comfortable!  Having that hard plastic press against my wrist for several hours a day got to be painful.  It felt like I had a bruise on my wrist. 

If I wouldn't like wearing it, I'm certainly not going to make it for other people!  That would just be... well, wrong.

So, I'm modifying the design.  I'm going to make large polyclay squares with stamped designs and I'll lace it all together with leather lace.  I think it'll be awesome.  I really do.

Well, that's that for the experiment.  It was fun and I learned quite a bit from it. 

A Brand New Item

We've just posted a brand new bracelet! It's a lot of fun. If you like ruby colored crystals, this one's got'em!


On a side note, we've been very busy these past couple weeks. Or however long it's been. I've had a bunch of work to do in my day job and Karla's been working in every bit of free-time she's had to create new pieces. She has a jewelry party scheduled for later this month. A lady from church is setting it up. And I'll get to stay home and take care of the little guy. I'm sure she'll have a lot of fun!

And, I still have those photos for the tutorial, I just haven't made time to write anything yet. Hopefully soon!

Polyclay Cuff Bracelet, Pt. 2

Ok, so I think I'm making progress!  I took the polyclay blank that I made the other day and tried to superglue some wire to it.  Yeah... not so much.  It didn't work as well as I'd hoped, mainly because the superglue took SOOOO long to dry.  So I gave up on that.

I rolled out another 'slab' of polymer clay.  This one was a little bit thicker than the base I made and with colors!  Of course, I'll put more work into this layer if these things actually get off the ground.  Into this layer, I embedded the two thin wires.  I learned that I have to just embed part and leave a curve to the wire, otherwise it blows out the topside of the fresh clay when I try to wrap it around the blank.

So I got it wrapped around.  It looked good.  I took a Bic pen and just made some knicks in the clay and some small slices with the blade to make it look a little worn... "stylish" if you will.  *grin*  I made sure the wire was bent so that the cuff would be a small size while baking.

Then I put it in the oven.

I let it cool for a half an hour in the oven after it was done cooking and then pulled it out to let it cool the rest of the way.  I'm wearing it right now.  I was afraid to put it on.  It was really small, but it bent very well to go on my wrist.  It's stayed on for at least 20 minutes.  The only thing I'm noticing is that, since it's plastic, my skin isn't breathing very well.  I'm not really concerned with that at the moment.  The thing is pretty comfortable.  It's gripping my arm well.  It even felt tight a little bit ago, but I think it's conforming a little to the size of my wrist.

So... this part of the experiment is done.  Now to see if it stands up to a weeks worth of daily use!  Stay tuned...

"Same Cuff time!  Same Cuff channel!"

 

Polyclay Cuff Bracelet?

Can it be done?  I'm determined to do it!  There has to be a way to get a quality cuff bracelet made from polymer clay.  I've seen quite a few people put the clay over a metal blank... but I'm too unique to do that! 

I began experimenting with it tonight.  I first made a form out of folded aluminum foil with some wire running through it to help it hold the shape I wanted.  I rolled out a sheet of polymer clay and applied it to that form, the baked it.  Once it cooled, I peeled the form off the inside.

I immediately saw that I've got a problem.  The Sculpey Premo that I used has a good amount of flex to it.  That's the reason I used it for this project.  It's too much.  I put the basic cuff on and it falls right off.  It's own weight makes it open and close.  I need some wire in it to help it keep it's shape. 

I see the wisdom in using the metal blanks.  But I'm still not going to give up on this and use them!  Not yet, anyway.

So... here's the plan.

1.  Roll out another sheet of clay to put over the basic cuff.  I'll stamp designs and such on it.

2.  Put wire in between the second sheet and the basic cuff.  This should help it keep the form I want.

3.  Bake it and finish it.

4.  Wear the darn thing for a week!  I need to see if it's durable enough.  If it breaks because the clay can't support the daily use then there's no point in going any further.

Ok, now.  GOGOGOGO!